EVA Foam High density
EVA Foam High density

High denstity foam is for armor or accessories. In 1mm and 3mm thickness, it is ideal for very resistant details. It smooth sides make you win a lot of time.

Due to the cutting process, some plates have black streaks. These disappear under the painting.

not rated 1,0062,00 VAT Include Select options
Low density foam
Low density foam

This low density foam is really flexible. Its flexibility makes it the ideal foam for use with Worbla, Thibra, CosplayFlex or to do details. Its low opacity makes it the ideal foam for use with LEDs. It can also be used to create larp weapons.

Due to the cutting process, some plates have black streaks. These disappear under the painting.

not rated 2,7535,00 VAT Include Select options
Contact cement
Contact cement

Contact cement is a solvent-based glue. It is transparent and remains flexible after gluing. To fix two surfaces, it is necessary to paste them both. Wait for the glue to dry then presse the two surfaces. Pressure must be maintained for at least 5 seconds. Gel glue is less liquid than the classic glue. Overflows are therefore easier to catch up. The two types of glue can be spread with a brush.

not rated 4,1518,85 VAT Include Select options
Hot glue gun’ nozzle
Hot glue gun’ nozzle

Hot glue gun’ nozzle This nozzle allows you to replace the nozzle already in place on the hot glue gun. Its great advantage is to get out a finer and more accurate glue net than the traditional nozzle glue. Its length also allows to reach places difficult to access with a strandard nozzle.

not rated 5,25 VAT Include Add to basket
Wood glue
Wood glue

Wood glue can be spread on your pieces and costume to smooth them out and fill the small holes. It is possible to dilute it with water to make it more liquid (and therefore easier to spread).

not rated 6,259,25 VAT Include Select options
Hot glue
Hot glue

Hot glue is part of the thermoplastic adhesives. It is available in sticks and must be melted using a heat gun. The sticks are available in different sizes (diameter and length). It is important that the diameter of the stick matches that of the heat under penalty of overflow of glue gun. Once the glue is spread out, you have to press the sides to assemble until they have cooled.

not rated 8,9525,95 VAT Include Select options
Plasti Dip handle
Plasti Dip handle

This handle helps you when you apply your Plasti Dip. It makes easier to have a even surface and a smoother look.

not rated 9,95 VAT Include Add to basket
Carved foam
Carved foam

You don’t want to struggle to make a wood texture on your foam? This product is for you! You want to create a futuristic outfit, the honeycomb texture is for you!

The textures are made on the high density foam in 5mm thick and on the plates of 50cm side. The stock is limited. A manufacturing time of 10 working days is possible depending of the stock and the number of plates you want.

It is possible to have plates of 90cm * 1m. Contact me to request an estimation.

not rated 11,6531,15 VAT Include Select options
Plasti Dip
Plasti Dip

Plasti Dip is a liquid elastic coating that, when it dries, forms a layer of rubber protection. The number of layers to be applied depends on the desired end result. It can arise on a number of materials. Originally, it is used in car body and car decoration. It is used in cosplay to smooth foam pieces and fill the small holes. It is recommended to use it in a well ventilated area and not too hot, so the polymerization won’t speed up. The wearing of adequate protection (masks, gloves and goggles) is mandatory. It is also recommended to cover the arms to avoid contact with the skin. It is possible to remove the Plasti Dip once on the skin, but you will lose some hair. The Plasti Dip Metallizer (gold, silver and aluminium) need to be used on Plasti Dip mat.

not rated 12,5017,50 VAT Include Select options
Kwik seal
Kwik seal

A lot of US props maker or europeans like Kamui Cosplay love this product. It is easy to use. You only need to apply it and then smooth it with water. You should wear safety gloves to avoid skin issues. You need to apply it above 4° Celsius. Keep it at an ambiant temperature, not to close to heat sources. You need to wait at least 2h to dry it completely.

 

It contains 162 gr.

not rated 15,50 VAT Include Add to basket
Samples pack
Samples pack

This samples pack includes a sample of all foam sold in the e-store. Sold plates are 295 * 195 mm. You can find foam high density foam in 10 mm, 5 mm, 3 mm and 1mm thick. Low density foam is supplied in 10 mm and 5 mm thick.

not rated 15,95 VAT Include Add to basket
The freestyle cutter
The freestyle cutter

This cutter cut shapes in a completely free way. He has the distinction of being a cutter that cuts to the front. Therefore push to cut the shapes and not pull (like the majority of cutters). This cutter is designed to work with, maximum, 5 mm thick foam. Always place a piece of used foam or cardboard beneath your cutting area in order to preserve the blade and extend its life. It comes with 2 spare blades.

Its remplacement blade is the WB.

Some advices to do efficient cuts :

  • Put the blade in the right direction;
  • Press well on the cutter’s head to embed the blades;
  • You need to push this cutter to do the cuts (and not pull it)
  • Pull slowly on the cutter. If you’re going to fast you might ripp off the foam (espicially low density);
  • Use the same pressure during the whole cut or the depth won’t be the same everywhere.

Beware that some low quality foams will rip off even if you do it right by the book.

not rated 18,95 VAT Include Add to basket
The bevel cutter
The bevel cutter

This cutter can make straight cuts, but also cuts bevels. It is possible to adjust the support’s block to tilt the cutter. You can directly cut bevels without having to bend the blade or twist your hand. Different heights are possible (up to 10mm deep). Always place a piece of used foam or cardboard beneath your cutting area in order to preserve the blade and extend its life. It comes with 2 spare blades.

Its remplacement blade is the WC.

Some advices to do efficient cuts :

  • Put the blade in the right direction (it might seems obvious, but be sure to put the sharp part beneath);
  • Start at the edge of the foam;
  • Pull slowly on the cutter. If you’re going to fast you might ripp off the foam (espicially low density);
  • Use the same pressure during the whole cut or the depth won’t be the same everywhere;
  • Stay at the same distance of the edge and be well parallel or your cut won’t be straight.

Beware that some low quality foams will rip off even if you do it right by the book.

not rated 18,95 VAT Include Add to basket
Hot glue gun
Hot glue gun

This hot glue gun is needed to use the hot glue sticks. It is sold with three sticks and a normal nozzle. You can change the nozzle if you want more precisions.

not rated 25,95 VAT Include Add to basket
The straight cutter
The straight cutter

This cutter allows you to cut straight edges on the foam of 3.1 mm to 12.7 mm. The blade is easily adjustable. Always place a piece of used foam beneath your cutting area in order to preserve the blade and extend its life. It comes with 5 spare blades.

Its remplacement blade is the WC.

Some advices to do efficient cuts :

  • Put the blade in the right direction (it might seems obvious, but be sure to put the sharp part beneath);
  • Start at the edge of the foam;
  • Press well on the cutter’s head to embed the blades;
  • Pull slowly on the cutter. If you’re going to fast you might ripp off the foam (espicially low density);
  • Use the same pressure during the whole cut or the depth won’t be the same everywhere.

Beware that some low quality foams will rip off even if you do it right by the book.

not rated 28,95 VAT Include Add to basket
The V Groove cutter
The V Groove cutter

This cutter allows you to cut V Grooce thanks to its adjustable blades in depth. It can cut up to 15 mm deep. Always place a piece of used foam or cardboard beneath your cutting area in order to preserve the blade and extend its life. It comes with 5 spare blades.

Its remplacement blade is the WC.

Some advices to do efficient cuts :

  • Put the blade in the right direction (it might seems obvious, but be sure to put the sharp part beneath);
  • Start at the edge of the foam;
  • Pull slowly on the cutter. If you’re going to fast you might ripp off the foam (espicially low density);
  • Use the same pressure during the whole cut or the depth won’t be the same everywhere;

Beware that some low quality foams will rip off even if you do it right by the book.

 

not rated 31,95 VAT Include Add to basket
The circle cutter
The circle cutter

This cutter cut circles from 2.5 cm to 15.25 cm in diameter. The blade is easily adjustable. The plastic dome allows user’s protection. Always place a piece of used foam or cardboard beneath your cutting area in order to preserve the blade and extend its life. It comes with 3 spare blades.

Its remplacement blade is the WA.

Some advices to do efficient cuts :

  • Put the blade in the right direction;
  • All the cutter must be on the same level and on a flat surface;
  • Watch out on the blade’s cutting way or you will rip off your foam.

Beware that some low quality foams will rip off even if you do it right by the book.

not rated 39,95 VAT Include Add to basket